Hydraulic oils
| Product | Base oil | Anti - wear additives | Viscosity 40 ° C ( mm² / s ) | V.I | Pour - point ( ° C ) |
|---|---|---|---|---|---|
| Hyspin AWH 46 Superclean | 46 | 150 | -34 | ||
| Hyspin AWH 68 Superclean | 68 | 150 | -38 | ||
| Hyspin AWH 100 Superclean | 100 | 150 | -37 | ||
| Hyspin AWS 10 | 10 | 95 | -36 | ||
| Hyspin AWS 15 | 15 | 95 | -39 | ||
| Hyspin AWS 22 | 22 | 95 | -30 | ||
| Hyspin AWS 32 | 32 | 95 | -30 | ||
| Hyspin AWS 46 | 46 | 95 | -21 | ||
| Hyspin AWS 68 | 68 | 95 | -21 | ||
| Hyspin AWS 100 | 100 | 95 | -21 | ||
| Hyspin AWS 150 | 150 | 95 | -21 | ||
| Hyspin AWS 220 | 220 | 95 | -18 | ||
| Hyspin AWS 32 Superclean | 32 52 | >95 | -27 | ||
| Hyspin AWS 46 Superclean | 46 | >95 | -24 | ||
| Hyspin AWS 68 Superclean | 68 | >95 | -21 | ||
| Hyspin AWS 100 Superclean | 100 | >95 | -18 | ||
| Hyspin AWS 150 Superclean | 150 | >95 | -15 | ||
| Hyspin Heavyduty 32 | 32 | 95 | -18 | ||
| Hyspin Heavyduty 46 | 46 | 95 | -18 | ||
| Hyspin Heavyduty 68 | 68 | 95 | -18 | ||
| Hyspin VG 32 | R & O | 32 | 95 | -30 | |
| Hyspin VG 46 | R & O | 46 | 95 | -30 | |
| Hyspin VG 68 | R & O | 68 | 95 | -24 | |
| Hyspin ZZ 46 | HLP | 46 | 101 | -30 | |
| Hyspin ZZ 68 | 68 88 | 101 | -30 | ||
| Tribol HM 943/32 | Spec. mineral oil | 32 | 115 | -27 | |
| Tribol HM 943/46 | 46 | 118 | -30 | ||
| Tribol HM 943/68 | 68 | 118 | -24 | ||
Shock absorber oil |
|||||
| Hyspin 4004 | Mineral oil | HVLP | 16.2 | 202 | -57 |
Fire-resistant hydraulic oils |
|||||
| Anvol SWX 46 | Polyolester | AW | 46 | 180 | - |
| Anvol WG 46 | Glycol + water | AW | 46 | >200 | - |
Fire-resistant hydraulic oils |
|||||
| Alphasyn K15 | PAO | EP / AW | 15 | 177 | -40 |
| Magna 2 | Mineral oil | - | 2 | 80 | < -30 |
| Hyspin spindle coolant SF | - | - | - | >150 | -15 |
| Hyspin spindle oil E5 | Mineral oil | AW | 5 | NA | -39 |
| Hyspin spindle oil EE 10 | Mineral oil | AW | 13 | NA | -12 |
| Product | Base oil | DIN class | Viscosity 40 ° C ( mm² / s ) | Viscosity index | Pour - point ( ° C ) |
|---|---|---|---|---|---|
| Tribol BW 22 | Mineral oil | - | 24 | 90 | -15 |
| Tribol BW 32 | Mineral oil | - | 32 | 90 | -21 |
Greases
| Product | Thickener | Base oil | NLGI Class | B.O Viscosity @ 40°C (mm²/s) | Operating temp range ( ° C ) | Application |
|---|---|---|---|---|---|---|
High performance multipurpose greases |
||||||
| Optitemp SB 100-1 | Lithium | PAO | 1 | 100 | -40 | 140 | Fully synthetic, high - performance roller bearing grease to prevent corrosion during standstill corrosion ( false brinelling ) |
| Tribol GR 100-00 PD | Lithium | Mineral oil | 0 | 130 | -35 | +140 | Suitable for long - term use in highly "stressed ball and slide bearings as well as expander rollers, bearings of feed rollers on steel rolls and for altyernating bearings or ones subjected to rotation / swive movements. |
| Tribol GR 100-0 PD | Lithium | Mineral oil | O | 130 | -35 | +140 | |
| Tribol GR 100-1 PD | Lithium | Mineral oil | 1 | 95 | -35 | +140 | |
| Tribol GR 100-2 PD | Lithium | Mineral oil | 2 | 95 | -35 | +140 | |
| Molub-Alloy 6040 / 460-1.5 | Calcium sulphonate complex | Mineral oil | 1-Feb | 460 | -20 | +130 | High - performance grease, recommended for use in slide and roller bearings exposed to high stresses in various industrial sectors. |
| Molub - Alloy 6080 / 460-1.5 | Calcium sulphonate complex | Mineral oil | 1-Feb | 460 | -20 | 230+ | Used in bearings that are under heavy water or aggressive process fluid. |
| Molub - Alloy 777-2 ES | Lithium | Mineral oil | 2 | 950 | -20 | +120 | Greases for high demands in adverse environmental conditions in all types of roller bearings, slide bearings, spindles, joint couplings in the steel or in the construction industry, mining and forestry. |
| Molub - Alloy 860 / 220-2 ES | Lithium complex | Mineral oil | 2 | 220 | -20 | +140 | High - performance grease, recommended for use in highly stressed slide and roller bearings at normal to increased operating temperatures. |
| Molub - Alloy 860 / 460-1 ES | Lithium complex | Mineral oil | 1 | 460 | -30 | +140 | |
| Molub - Alloy 860 / 460-2 ES | Lithium complex | Mineral oil | 2 | 460 | -20 | +140 | |
| Molub - Alloy 870-2 | Lithium | Mineral oil | 2 | 1776 | 0 | +120 | High - performance grease for highly stressed and slow - moving roller bearings. |
| Tribol GR 400-2 PD | Lithium | Mineral oil | 2 | 320/460 | -30 | +140 | For use in slide and roller bearings underdifficult conditions, such as high moisture, dust and vibration. |
| Tribol GR 400-3 PD | Lithium | Mineral oil | 3 | 320/460 | -20 | +140 | |
| Tribol GR 1350-2.5 PD | Lithium | Mineral oil | 2.5 | 1350 | -10 | +140 | Developed for the lubrication of slide and roller bearings in mining, the metal-working industry, in rolling mills and port facilities, equipment on ships and oil rigs. |
| Tribol GR 3020 / 1000-00 PD | Lithium | Mineral oil | 0 | 1000 | +120 | -40 | Suitable for use in all types of slide and roller bearings, spindles, joint couplings, chassis, cams and general lubrication points which are exposed to high loads and low speeds. |
| Tribol GR 3020 / 1000-1 PD | Lithium | Mineral oil | 1 | 1000 | -30 | +120 | |
| Tribol GR 3020 / 1000-2 PD | Lithium | Mineral oil | 2 | 1000 | -40 | +120 | |
| Tribol GR 4020 / 220-2 PD | Lithium complex | Mineral oil | 2 | 220 | -30 | +150 | Multi - purpose greases for highly stressed roller and slide bearings such as in the automotive industry, along with industrial applications requiring a high performance grease. |
| Tribol GR 4020 / 460-2 PD | Lithium complex | Mineral oil | 2 | 460 | -20 | +150 | |
High temperature greases |
||||||
| Molub - Alloy 1000 HT | Organic | PAO / Ester | 1 | 540 | 230 | Developed for bearings, slide ways and guide bushings on conveyor systems in coating furnaces; also suitable for use in rotating cement furnaces as a gas-sealing lubricant. |
| Tribol GR HT2 | Silica acid | Mineral oil | 2 | 460/680 | -20 | +160 | For use in long - term lubrication of slide and roller bearings at high operating temperatures as well as normal to moderate bearing pressures. |
| Tribol GR PS 2 HT | Polyurea | Mineral oil | 2 | 460 | -25 | +160 | For application in highly stressed slow- moving to medium - moving slide and roller bearings, such as sterilisers in the food industry, eccentric presses, forging presses, continuous casting plants and calender bearings. |
| Tribol GR 4747 / 220-2 HT | Lithium complex | PAO / Ester | 2 | 220 | -40 | +160 | For use in slide and roller bearings subjected to high stresses requiring increased anti - wear protection in the boundary and mixed friction range ( briefly up to + 180 ° C ). |
| Tribol GR XT 2 HT | Polyurea | PAO | 2 | 270 | -25 | +180 | High - temperature grease for use in ball and slide bearings; suitable for lubrication bearings running at very high temperatures. |
Low temperature greases |
||||||
| Molub - Alloy 243 Arctic | Calcium | Mineral oil | 13 | -55 | +80 | For lubricating slide and roller bearings in pumps, motors and transport systems at extremely low temperatures ( up to -55 ° C ). | |
| Optitemp LG 2 | Lithium | PAO | 2 | 46 | -50 | +120 | Specifically for use at low temperatures and in fast - running bearings in the normal temperature range. Very compatible with plastics and elastomers. |
| Tribol GR TT 1 EP | Lithium / silicic acid | Ester | 1 | 15/22 | -60 | +120 | Suitable in use for slide and roller bearings with moderate bearing pressures. For use in great temperature differences, contains MoS2 |
Gear Oils
| Product | Base oil | Viscosity at 40 ° C | V.I | Pour - pt.( ° C ) | Application |
|---|---|---|---|---|---|
| Alpha BMB 680 | Mineral oil | 680 | 94 | -6 | Gear oils with solid lubricants suitable for bearings & gears with high loads. Compliant with DIN 51 517 Part 3 Type CLPF. |
| Alpha SMR NB | 800 | >95 | 6 | Suitable for the lubrication of sugar mill crusher & mill roll bearings. Applied by means of mechanical force - feed lubricators. Also used for slush pan lubrication of open gears and in centralized lubrication systems for slow speed spur gears. | |
| Alpha SMR NB Heavy | 950 | >95 | 6 | ||
| Alpha SP 68 | 68 | 102 | -21 | Heavy metal - free gear oil suitable for use in gears with medium and high load-carrying capacity as well as bearings & hydraulic systems. Compliant with DIN 51 517 Part 3 - CLP DIN 51 524 Part HLP and SEB 181 226. | |
| Alpha SP 100 | 100 | 97 | -21 | Heavy metal - free gear oil suitable for bearings, gears with medium & high load carrying capacity, and in circulating systems. Compliant with DIN 51 517 Part 3 - CLP , DIN 51 524 Part 2 - HLP, Flender BA 7300, and SEB 181 226. | |
| Alpha SP 150 | 150 | 97 | -21 | ||
| Alpha SP 220 | 220 | 97 | -21 | ||
| Alpha SP 320 | 320 | 96 | -21 | ||
| Alpha SP 460 | 460 | 96 | -6 | ||
| Alpha SP 680 | 680 | 90 | -6 | ||
| Alphasyn EP 220 | PAO | 220 | 140 | -42 | Gear oils suitable for use in closed gears which are exposed to shock loads. Compliant with: DIN 51 517 Part 3, AGMA 9005 - D94, U.S.Steel 224, David Brown Type E, Hansen Transmissions, Flender and Lohmann & Stolterfoht. |
| Alphasyn EP 320 | 320 | 140 | -36 | ||
| Alphasyn PG 220 | PG | 220 | 235 | -39 | PAG ( Polyglycol ) based synthetic gear oils suitable for lubricating gears under high mechanical & thermal loads. Operating temp. range: briefly up to + 180 ° C. Compliant with DIN 51 517 Part 3 - CLP. |
| Alphasyn T 220 | PAO | 220 | 140 | -45 | Gear and hydraulic oils free of heavy metals used for gears, central lubrications and hydraulics subjected to high thermal loads. Fulfils 51 517 Part 3 - CLP requirement. |
| Premium gear oils | |||||
| Optigear 1100/680 | Mineral oil | 680 | 86 | -18 | Gear oils to lubricate spur gears, bevel gears, planetary gears and gear couplings as well as sliding & rolling surfaces of bearings. |
| Optigear 1100/1000 | 1000 | 80 | -18 | ||
| Optigear 1100/1500 | 1500 | 84 | -15 | ||
| Optigear BM 68 | 68 | 103 | -24 | Gear oils for long-term lubrication under extreme conditions. For use in spur gears, bevel gears, worm gears, cams, control shafts and planetary gears, actuators, closed gear coupling and all types of bearings (roller bearings, disk cylinders, full complement cylindrical roller bearings and thrust bearings). | |
| Optigear BM 100 | 100 | 100 | -21 | ||
| Optigear BM 150 | 150 | 98 | -18 | ||
| Optigear BM 220 | 220 | 92 | -15 | ||
| Optigear BM 320 | 320 | 92 | -15 | ||
| Optigear BM 460 | 460 | 92 | -12 | ||
| Optigear Synthetic X 220 | PAO | 220 | 179 | -45 | Fully synthetic gear oils for use in spur gears, bevel gears and planetary gears and high loads such as in wind energy. |
| Optigear Synthetic X 320 | 320 | 152 | -33 | ||
| Optigear Synthetic X 460 | 460 | 153 | -27 | ||
| Optigear EP 220 | Mineral Oil | 220 | 95 | -15 | High-performance gear oil for long-term lubrication even under difficult mechanical conditions. Suitable for spur gears and bevel gears xposed to shock loads, ball bearing lubrication, gear couplings and drive units of rail-based vehicles.Compliant with DIN 51 517 Part 3, CLP gear oils & API GL-5. |
| Optigear EP 320 | 320 | 95 | -9 | ||
| Optigear RMO | 150 | 133 | -51 | High-performance long-term gear oil for spur gears, bevel gears and ball bearings. | |
| Optigear Synthetic 800/100 | PG | 100 | 205 | -42 | Synthetic gear oils to lubricate ball bearings & slide bearings in spur gears, bevel gears and in worm gears of slide bearings and ball bearings, PVC calendering lines, kneaders, conveyor systems, steel mills and grinders. |
| Optigear Synthetic 800/150 | 150 | 210 | -36 | ||
| Optigear Synthetic 800/220 | 220 | 215 | -33 | ||
| Optigear Synthetic 800/320 | 320 | 230 | -30 | ||
| Optigear Synthetic 800/460 | 460 | 240 | -30 | ||
| Optigear Synthetic 800/680 | 680 | 260 | -27 | ||
| Optigear Synthetic 800/1000 | 1000 | 275 | -24 | ||
| Optigear Synthetic PD 220 ES | PAO | 220 | 172 | -48 | Synthetic high-performance gear oils with special PD additives (plastic deformation).For use in spur gears, bevel gears and planetary gears & heavy-duty gears.It prevents formation of micro-pitting and has positive effect on the contact pattern of gears. |
| Optigear Synthetic A 320 | 320 | 140 | -36 | Fully synthetic gear oils for industrial gears operating under high loads eg wind turbines, conveyor belts, crane gears, elevators, steel mills, heavy-duty cams, gear couplings, chain drives, drives, slide bearings, ball bearings and transport systems during winter operation. | |
| Optigear Synthetic CT 320 | 335 | 172 | -49 | Wind turbine gearbox, all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. | |
| Optigear Synthetic RO 150 | 140-160 | 130 | -36 | Spur gear teeth, bevel gear unit, all types of roller bearings. Can be used in a broad range of temperatures. | |
| Optigear Synthetic ALR 150 | 150 | 148 | -45 | Designed for use in robot gear box systems, to extend oil change intervals for lower downtime and increased maintenance intervals. |
Aqueous Cleaners
| Product | Max Operating Temperature (°C) | pH @ 5% | Application |
|---|---|---|---|
| Techniclean 80 XBC | Ambient - 80 | 9.9 | Low-foam aqueous cleaner for ferrous and aluminium parts with corrosion protection and long bath life. |
| Techniclean 8580 | 30-70 | 11 | Alkaline cleaner for ferrous metals removing oil and industrial soil. |
| Techniclean CPL | 20-65 | 9.2 | Micro-emulsion cleaner for ferrous and non-ferrous metals. |
| Techniclean DG | 50-65 | 9 | Emulsion cleaner for industrial parts and maintenance cleaning. |
| Techniclean HP | 20-65 | 9.3 | High-pressure cleaner for metal components. |
| Techniclean MP | 20-65 | 10.2 | Multi-purpose cleaner for oils and dirt removal. |
| Techniclean SF | 20-80 | 9.7 | Spray wash cleaner for inter-operational and final cleaning. |
Corrosion Preventives
| Product | Flash Point (°C) | Indoor Protection (months) | Outdoor Protection (months) | Application |
|---|---|---|---|---|
| Solvent based RPO | ||||
| Rustilo DW 4130 | 58 | 18 | 3-Jun | Soft-film dewatering corrosion preventive for long-term indoor protection of parts exposed to water-containing coolants, cleaners or rinses; stable film reduces run-off. |
| Rustilo DWX 32 IN | 40 | 18 | 9 | Heavy-duty, water-displacing solvent rust preventive that deposits a soft/greasy protective film for medium- to long-term protection in severe conditions. |
| Rustilo DWX 32 VAL | 40 | 12 | 6 | Water-displacing dewatering and corrosion preventive forming a soft waxy protective film; suitable after machining with soluble fluids or aqueous cleaning. |
| Rustilo DW 901 | 40 | 12 | 3 | Water-displacing rust preventive for severe conditions; leaves a durable greasy film resistant to handling for storage of valuable machine tools and components. |
| Rustilo 401 CR | 40 | 9-Dec | 3-Jun | Barium-free, solvent-deposited dewatering corrosion preventive leaving a soft waxy film; designed for cold-rolled steel strip protection prior to packing/dispatch. |
| Rustilo DW 270 HF | 90 | 9-Dec | 3-Jun | High-flash dewatering rust preventive; removes water after electroplating/machining/washing and leaves a thin oily film with salt spray and acid fume resistance. |
| Rustilo DW 812 | 80 | 9-Dec | 3-Jun | High-flash dewatering corrosion preventive that dries to a thin nearly dry-to-touch film; provides medium- to long-term protection in humid/adverse conditions. |
| Rustilo DWX 30 | 40 | 8-Dec | 3-Jun | Fast dewatering corrosion preventive leaving an ultra-thin slightly greasy film; suited for inter-operational protection and intermediate storage/transport. |
| Rustilo DW 300 X | 65 | 8-Dec | 3-Jun | Premium solvent-deposited dewatering corrosion preventive leaving an ultra-thin greasy film; ideal for intricate components and intermediate storage. |
| Rustilo DW 310 | 80 | 10 | 5 | Dewatering corrosion preventive leaving a thin greasy film; protects vehicle parts, fasteners and pressings during intermediate storage/transport. |
| Rustilo DW 809 | 80 | 6-Sep | 3 | High-flash, thin-film dewatering rust preventive with excellent salt spray resistance; provides medium- to long-term protection for high-finish components. |
| Rustilo DW 902 | 40 | 9 | 2 | Water-displacing rust preventive leaving a soft, tacky oily film with good mechanical strength; excellent salt spray resistance for sea freight protection. |
| Rustilo DW 904 | 40 | 6 | Not recommended | Dewatering corrosion preventive leaving a thin oily film; rapid water displacement for intricate components and recommended for parts to be wrapped in paper. |
| Rustilo DW 250 HF | 95 | 9 | 3 | Dewatering corrosion preventive with vapour phase corrosion inhibitor (VCI); leaves a viscous oily film for medium-term protection, best performance in sealed packs. |
| Rustilo DW 806 | 80 | 3-Jun | High-flash dewatering rust preventive leaving an ultra-thin oily film; short- to medium-term indoor protection for intermediate storage of machined parts. | |
| Rustilo DW 950 | 40 | Dewatering fluid that leaves no perceptible film; provides a dry surface finish for electroplated/anodised parts and for steel components prior to painting. | ||
| Rustilo 5905 | 65 | Neat assembly and corrosion preventive fluid for brake and clutch hydraulic units; residual film is compatible with brake fluid and designed for elastomer compatibility. | ||
| Rustilo DW 800 | 80 | High-flash dewatering fluid with no perceptible film; prevents water spots on polished/plated parts and does not hinder paint adhesion or subsequent coatings. | ||
| Oil based RPO | ||||
| Rustilo HL 01 | 200 | Solvent-free, oil-type protective with vapour-phase corrosion inhibitor (VCI) for precision and moving parts; non-hardening film and good filtration performance. | ||
| Rustilo 66 VCI | 150 | Up to 5 years | Oil-based protective with vapour-phase corrosion inhibitor (VCI) designed to clean and protect ball/roller bearings; maximum protection achieved in hermetically sealed packs. | |
| Rustilo 636 | 150 | Up to 9 | 2 | Low-viscosity mineral oil-based, solvent-free corrosion preventive for sheet and tube processing; forms an even oily film for reliable medium-term protection during storage and transit. |
| Rustilo 630 | 180 | 4 | 1 | General-purpose, oil-based rust preventive that forms a thin lubricating film for short-term inter-operational protection and as a flushing/protective oil for internal machinery storage. |
Quenching oils
| Product | Viscosity at 40 ° C ( mm² / S ) | Operating temp range ( ° C ) | Application | |
|---|---|---|---|---|
| lloquench 1 | 20 | 30 | 80 | Universal use hardening oil suitable for construction steels and Q & T steels with small to medium cross - sections. |
| 50 | 100 | |||
| lloquench 100 | 110 | 50 | 120 | Oxidation- and temp - stable hardening oil of higher viscosity, suitable for higher - alloyed steels due to its cooling properties. |
| 120 | 180 | |||
| Iloquench 798 | 176 | 50 | 80 | Hardening of medium carbon and low alloy steels, carburised or carbonitrided components and of components subject to distortion, Suited for components such as gears, blade steels etc. |
| 50 | 180 | |||
| Soluble quenching oil | ||||
| Iloquench 700 Aqua | - | 20 | 45 | For steel components in induction or flame hardening applications to reduce warping or cracks. |
Neat coolants
| Product | Properties | Application | ||
|---|---|---|---|---|
| Viscosity at 40 °C | Flash point | Copper corrosion stripe test | ||
| ( mm² / s ) | ( °C ) | (§h/ 100 ° C ) | ||
| General Machining | ||||
| Carecut ES 1 | 28 | >270 | lb | Cutting oil based on ester for extreme lubrication requirements with high flash point. |
| Carecut ES 3 | 5.5 | 170 | 1b | Honing and micro - finishing oil based on ester for extreme lubrication requirements. |
| llocut 103 | 35 | 180 | 4c | Suited for automatic, semi - automatic and combination turret lathework, gear cutting, threading and tapping operations on high tensile steels. |
| llocut 1253 | 10 | 150 | 4b | Used for deep hole oring, deep hole drilling, including gun drilling and turning operations. |
| llocut 154 | 38 | 180 | 1b | Used to service repetition machining on smaller automatics. Suitable for general purpose machining on both ferrous and non - ferrous metals. |
| llocut 155 | 37 | 150 | lb | Designed for general machining of ferrous and non ferrous alloys. |
| llocut 156 | 65 | 180 | lb | Used in high speed nut forming machines. |
| llocut 1945 | 29 | 180 | 4c | Suited for multi spindle automats, multitool lathes and form tool work. |
| llocut 330 | 23 | 180 | 4c | Chlorine - free universal coolant for use in all medium- duty machining operations. |
| llocut 334 | 14 | 150 | 4c | Suited for gun drilling systems, BTA boring systems and ejector boring systems where the coolant is forced under pressure to clear swarf without foaming. |
| Ilocut 482 | 24 | 180 | lb | Suited for machining of ferrous and non ferrous metals, for automatic lathe work, thread grinding, form grinding, milling, etc. |
| llocut 534 | 16 | 160 | 4c | Low viscosity and excellent EP properties for drilling and turning operations. High metal removal rate minimises production costs. |
| Honing | ||||
| Honilo 500 | 110 | 160 | lb | Can be used with silicon carbide abrasives for lapping of various bevels and ypoid gears. Used in flat tapping of diamod abrasives stellited rings. |
| Honilo 980 | 4.3 | 140 | lb | Honing and micro - finishing oil suitable for steel and non - ferrous metal processing. |
| Honilo 981 | 4.9 | 136 | lb | Used for Honing, finishing and micro-finishing oil applications |
| Variocut G 408 HC | 7.7 | 168 | la | Grinding oil for use in carbide grinding, particularly tools susceptible to cracking. Based on "Extreme High Viscosity Index ( EHVI )" |
| Grinding | ||||
| Variocut G 260 | 6.2 | 128 | la | Grinding and honing oil for alloyed steels, non- ferrous metals & aluminium alloys processing. |
| Variocut G 399 | 5.5 | >130 | 4c | Thin grinding oil for high - speed grinding to process steel. |
| Variocut G 408 HC | 7.7 | 168 | la | Grinding oil for use in carbide grinding, particularly tools susceptible to cracking. Based on "Extreme High Viscosity Index ( EHVI )" Hydrocracked base oil technology. |
| Variocut G 500 | 21 | >190 | lb | Grinding oil for use in flute grinding, e.g. twist drills and milling tools. |
| Variocut G 600 HC | 8.9 | >160 | lb | Grinding oil with high flash point for use in high - speed grinding. |
| Variocut G 650 HC | 9.1 | 170 | lb | Used in high - speed grinding, creep feed grinding, tooth gear grinding, drilling processes based on the " EHVI " hydrocracked base oil tech. |
| Broaching | ||||
| Ilocut 11 | 17 | >140 | lb | High - performance cutting oil for machining gears, processing steel, stainless steel and nickel alloys. |
| Variocut B 30 | 22 | 169 | 4c | High - performance broaching and cutting oil for machining of gears. Suitable for steel & stainless steel processing. |
| Minimum Quantity Lubrication (MQLs) | ||||
| Hyspray A 1536 | 27 | 180 | la | BioalcohoL based water - insoluble coolant for min lubrication use in machining Al alloys. |
| Dielectric/spark erosion | ||||
| llocut EDM 180 | 2.5 | 105 | lb | llocut EDM 180 is for fine finishing work, llocut EDM 200 and EDM 401 for finishing & roughing. Ilocut EDM 401 suitable as a grinding oil. |
| Hobbing | ||||
| llocut 1945 | 29 | 180 | 4c | Suited for multi spindle automats, multitool lathes and form tool work. |
| Performance Bio NC Plus | 40 | 282 | 1b | Based on renewable resources to improve your productivity and quality of your component; reduces the oil mist, smoke and the fire hazard. |
| Multi-purpose oil | ||||
| llocut 510 MP | 10 | 172 | la | Multi - purpose oil suitable for general purpose machining. |
| Ilocut 546 MP | 46 | 220 | la | Metal cutting processes of ferrous and non - ferrous metals. Conformed with HLP - D specification. |