| Soluble Cutting Oils | |
| Servocut S | Servocut S is soluble type high quality cutting oil, which yields rich milky emulsion with water. Special emulsifier is incorporated to ensure its complete dispersion in water. The emulsion formed is homogeneous and stable in nature and does not split during usage or routine machine shut down periods, under normal conditions. Servocut S contains rust inhibitors, which impart anti-rust and anti-corrosive properties to the emulsion. Carefully selected biocide is incorporated to prevent bacterial growth in the emulsion. Servocut S is recommended for variety of cutting operations on ferrous and non-ferrous metals. Servocut S meets IS : 1115-1986 (Reaffirmed 1996) specifications. |
| Servocut Super | Servocut Super is a superior quality soluble type metal working fluid, which torms stable translucent milky white emlusion and provides longer emulsion life. Servocut super gives excellent surface finish and extended tool life. It is recommended for a variety of cutting operations on ferrous and non-ferrous metals. It possesses better low temperature flow properties and provides enhanced corrosion protection to ferrous metals. The emulsion is stable even at 30:1 dilution. |
| Servocut S 700 | Servocut S 700 is a water soluble type superior quality cutting oil, which yields rich milky stable emulsion even with hard water. Special emulsifiers have been incorporated to ensure stable emulsion even upto 700 ppm water hardness. The emulsion formed is homogeneous and stable in nature and does not split during usage or routine machine shut down periods, under normal conditions. Servocut S 700 exhibits improved emulsion stability, cast iron corrosion protection and bio-stability characteristics at high water hardness in comparison to conventional soluble cutting oils. |
| Servocut Clear | Servocut Clear gives a transparent type of emusion with water and offers the advantage of visibility during machining. Servocut Clear provides excellent cooling and lubrication at chip/tool interface ensuring long tool life and improved suface finish. It is recommended for multi-tool set-ups in profile grinding, where the stable emulsion enables cutting tools to perform satisfactorily. This product offers better scope for manufacturing components to the correct dimensional tolerances. Servocut Clear meets IS:9611-1980 specification (Reaffirmed 1998). |
| Servocut AL 23 | Servocut AL 23 is a long life & bio-stable fluid for cutting application of non ferrous metals like aluminium, aluminium alloys, copper. It is also suitable for ferrous applications like cast Iron(CI), mild steel(MS), alloy steel etc. It does not contain chlorine additives and is also free from boron, nitrite, etc. Servocut AL 23 can perform in all cutting applications such as milling, turning, drilling, boring etc. on aluminium alloy components. It can withstand high water hardness of > 700 ppm and has an excellent control over bacterial growth thus providing long sump life. |
| Souble Cutting Oils oil EP Type | |
| Servocut EPS 452 | Servocut EPS 452 is a long life, bio-stable and EP (Extreme Pressure) type water miscible high performance cutting fluid. It is suitable for severe cutting operations on non ferrous metals like aluminum, aluminum alloys, copper and also for ferrous metal applications like cast Iron(CI), mild steel(MS), alloy steel etc. It contains chlorine additives and is free from boron, nitrite, etc. It withstands high water hardness of 600 ppm and is suitable for centrally managed sumps. |
| Servocut EPNC | Servocut EPNC is chlorine free water soluble cutting oil which has superior cooling and lubricating properties. Servocut EPNC is fortified with EP additives to take higher loads encountered during various cutting operations. Special emulsifier is incorporated to ensure its complete dispersion in water. Servocut EPNC is preferred for non-ferrous metals. This oil imparts excellent surface finish and minimizes tool wear. |
| Semi-synthetic/Synthetic Soluble cutting Fluids | |
| Servosynthcut 16 | Servosynthcut oils are Bio-stable Semi-synthetic Cutting fluids for cutting and grinding application of cast Iron(CI), mild steel(MS), alloy steel etc. These are high performance water miscible metal working fluids which do not contain any chlorine and are free from nitrosoamine, nitrites etc. They have excellent swarf removal and flushing characteristics. Servosynthcut oils are recommended for grinding and cutting operations on ferrous metals in water-mix form at concentration levels of 2-4 & 3-5 (% v/v) respectively. |
| Servosynthcut 26 | |
| Servosynth 2 | Servosynth products are water soluble synthetic grinding fluids. The solutions prepared from these fluids are fully clear and free from any oil or fatty matter. These products have remarkable antirust property. Servosynth 5 contains a special chemical inhibitor, which protects cuprous metal components of machines tools. Servosynth 2 is of a special value when grinding open grain cast irons, which tends to rust quickly after being machined. These fluids are not recommended for machining of non-ferrous metals. Servosynth fluids meet IS:11186-1985 specification (Reaffirmed 1995) |
| Servosynth 5 | |
| Servosynth 10 | |
| Servoynth NF 15 | Servosynth NF 15 is a water soluble synthetic cutting fluid. The solution prepared from this fluid is fully clear with greenish fluorescence and free from any oil or fatty matter. The product has remarkable antirust & anticorrosion property. Servosynth NF 15 contains a special chemical inhibitor, which is free from Nitrite & Amine. It is recommended for cutting of ferrous metals, high nickel and titanium alloys. |
| Neat Cutting oils | |
| Servocut 51 | Servocut 51 is a non-staining type neat cutting oil recommended for machining ferrous as well as non-ferrous metals and for repetative machining operations of less severe nature on automatics. Servocut 51 maintains light colour during service providing good visibility of machining operation and meets IS:3065 - 1985 (Reaffirmed 1995) Type 1 Grade 2 specification. Servocut 51 is also recommended for free cutting on mild steel, which involve high spindle speeds and short cycle time, particularly on screw automats, capstan or turrel lathes.Because of its non staining nature, it can also be used for machining copper, brass or alloys containing zinc. |
| Servocut 151 | Servocut 151 is a superior quality neat cutting oil recommended for a variety of machining operations on both ferrous and non-ferrous metals. It is suitable for automatic and multi-tool lathes handling high tensile steels. It can be used for such specialised applications as thread-grinding, form-grinding and milling set-ups using multiple cutters. It contains chlorinated compounds which impart EP property to the oil. The use of this cutting oil provides improved machinability without the risk of discolouration of components and avoids premature regrinding of cutting tools. Under selected conditions of speed and load, it can be used for machine tool lubrication also. Servocut 151 (CF) is eco-friendly cutting oil free from chlorine. |
| Servocut 201 | Serocut 201 is sulphurised fat containing neat cutting oil specially developed to cover a wide range of machining operations. It aids in obtaining good surtace finish and protects tools from excessive wear. This product is particularly suitable for machining operations of repetitive nature on small automatics. Servocut 201 meets IS: 3065 - 1985 Type 2 Grade 3 specificiation. This oil is recommended for all machining operations on ferrous and non-ferrous metals, where severity is not high. |
| Servocut 245 | Servocut 245 is a non staining EP type neat cutting oil containing Chlorine & inactive sulphur for application in deep hole drilling & honing applications on non-ferrous metals. The product has excellent swarf removal & flushing characteristics, other than its very good extreme pressure properties. |
| Servocut 253 | Servocut 253 contains special fatty material and active sulphur to provide extra cutting assistance under continuous long work-cycles. It has minimum mist forming tendency when used in high pressure coolant fed systems. The use of Servocut 253 optimises filter life due to its low sludg ing tendency at operating temperatures. It is recommended for deep hole boring, deep hole drilling including gun drilling and trepanning operations where pressurised coolant system is employed for easy swarf removal and effective cooling at the cutting point. It also provides satisfactory performance in deep hole boring of stainless steel. Servocut 253 is not recommended for use on non-ferrous metals. |
| Servocut 335 | Servocut 335/345 contain sulphurised and chlorinated additives which enable the use of these oils for extreme pressure at low or moderate temperature cutting operations where feed rates are high but speeds are low. Servocut 335/345 provide excellent performance in all machining operations on non-ferrous metals such as gear hobbing, gear shaving, screw cutting, tapping, milling, reaming etc. and they do not discolour the components. These can also be used for machining of ferrous metals where the severity of operation is not high. |
| Servocut 345 | |
| Servocut 353 | Servocut 353 is active sulphur- chlorinated type cutting oil which is used for machining of indicated shapes with high precision. It is a low viscosity product designed specially for arduos operations such as deep hole drilling and deep hole boring where pressurised delivery of the cutting fluid is required to clear fine swarf effectively. It is suitable for cutting of ferrous and ferrous alloys only. It is also suitable for certain honing operations. |
| Servocut 355 | Servocut 355 is neat cutting oil containing sulphurised fat, besides active sulphur and chlorinated additive. It is developed for servere metal cutting operations including gear cutting, broaching and threading of alloy and stainless steel. This oil provides a lubricating film, which resists cutting stresses and gives very good surface finish and long cutting tool life. Servocut 355 meets IS:3065 - 1985 Type 3 Grade 2 and is recommended for ferrous metals. |
| Servocut 945 | Serocut 945/945A are active type neat cutting oils and contain suiphurised fatty material and free sulphur to give better surface finish and longer cutting tool life over a wide range of operating temperatures. These oils are recommended for most of the cutting operations on ferrous metals under severe operating conditions, which demand high degree of chemical activity in oils. These oils are suitable for machining operation of high tensile stainless steel as well as nicket-chromlum alloys on automats, gear cutting, hobbing, drilling/reaming and thread cutting machines. Use of these oils should be avoided on non-ferrous metals. Servocut 945A contains a higher dosage of sulphursed fat for improved surface finish and tool life and meets IS:3065-1985 (Reaffirmed 1995) Type 3 Grade 2. |
| Servocut 945 A | |
| Servohycut DP 146 | Servohycut DP 146 is a dual purpose oil for use in Gear Hobbing machine as cutting oil as well as hydraulic oil. The same oil is ideally suitable for severe cutting operations such as gear cutting, hobbing, broaching, threading etc on high alloy steel and is also recommended as hydraulic oil in the gear hobbing machine. The oil is having adequate viscometrics, high viscosity index, superior anti-rust and anti-corrosive properties with excellent cooling efficiency and load bearing capability to work as dual purpose oil. This type of oil is suitable in such Gear hobbing machines where hydraulic oil leakages in to the cuttting oil system cannot be avoided. |
| Servocut BR | Servocut BR is a special purpose non-staining type neat cutting oil having very high oiliness property. The oil has excellent foam release ability and its use prevents overheating of work-piece thus eliminating chances of metal distorion. Servocut BR is recommended for flute grinding of drills, reamers and various types of form grinding tools, which involve critical metal grinding processes. This product is also suitable for gear cutting, hobbing and high speed metal working operations on automatics. It can be used on both ferrous as well as non-ferrous metals. |
| Servocut BR 16 | Servocut BR 16 is a heavy duty neat cutting oil for broaching application. This oil provides superior lubrication for high stock removal during cutting operations. The Extreme Pressure (EP) and Anti Wear (AW) additives ensure smooth operation, longer tool life and excellent surface finish of the workpiece after the broaching operation. The oil ensures lower coefficient of friction at tool-workpiece interface and thus effect superior cooling. These characteristics ensure quick dissipation of heat from work-piece and tool surfaces. |
| Servocut LP | Servocut LP is a general purpose non-corrosive type neat cutting oil, developed for light duty cutting operations like drilling, milling, grinding etc. Servocut LP has inherent oiliness property to reduce friction. The use of higher boiling basestock in the oil helps in reducing the evaporation rate and thereby bringing down the cutting oil consumption considerably. |
| Servocut GR | Servocut GR is a special purpose neat cutting oil of non-corrosive type, developed specially for granite cutting. It helps in keeping the work piece and cutting tool at lower temperature and avoids over heating. It ensures longer tool life and provides superior surface finish. Because of high IBP, the oil consumption is considerably lower. |
| Servocut ANC | Servocut ANC is non-staining inactive type cutting oil recommended for flute grinding of drills, reamers and various types of form grinding tools, which involves severe metal grinding process. It is ideally suited for gear cutting, hobbing and high speed metal working operations. Servocut ANC can be used on both ferrous and non-ferrous metals. |
| Servomet 033 | Servomet 033 is a low viscosity non-staining type neat cutting oil for general machining of aluminium alloys, magnesium and brass. It has excellent heat transfer properties to cool effectively under high speed condition. It is specifically recommended for deep hole drilling and similar operations of non-ferrous metals where the oil is fed under pressure to the cutting area to wash out swarf and debries. It is also suitable for lubrication of spindle drive cam cases. Servomet 033 can also be used in certain free machining operations of ferrous metals. |
| Servocut 375 | Servocut 375 is a specially formulated low viscosity neat cutting oil recommended for moderate to heavy duty cutting operations like gear hobbing, gear shaving, deep hole drilling, boring etc. It has synthetic ester, active sulphur and chlorine in optimum levels for sustained performance in heavy duty cutting operation. Servocut 375 forms boundary lubricating film at tool-chip interface and reduces frictional heat. The oil has minimum mist forming tendency. |
| Neat Honing Oil | |
| Servohone 7 | Serohone 7 is a low viscosity mineral oil specially developed for honing operations. It has extra fluidity to ensure quick and thoroug h flushing action and provides very good surface finish. It also gives long life to the honing stones. Apart from all type of surface finishing operation Servohone 7 can also be used in low severity machining operation such as grinding, turning etc. It is widely used for honing of ball bearing races and is ideal for super finishing operations, even on hardened metals. |
| Servohone 7 XL | Servo Hone 7 XL is a chlorine free low viscosity, high performance oil specially formulated for honing operations. It is suitable for severe application as well as super finishing operations. It can be useful in operations such as turning, drilling & tapping of aluminum alloys and certain machining operations on ferrous metals. The oil has high EP properties & contains a ester making it suitable for honing of both ferrous & non-ferrous metals. |
| Servohone 7 XL(T) | Servo Hone 7 XL (T) is a chlorine free low-viscosity honing oil having excellent demulsibility properties and fortified with sulphur scanvenger to reduce the sulphur leaching from the honing stone. It has high thermal stability and excellent cooling efficiency. It can be used on both ferrous as well as non-ferrous components. |
| Spark Erosion Fluids | |
| Servospark 2 | Servospark oils are used as the working fluid in electrical - discharge machining (EDM), also called spark erosion machining. These oil have the ability to provide uniform insulation and then to permit controlled electrical discharge at the breakdown voltage. Servospark oils also have the proper balance of viscosity, volatility, oxidation stability, heat transfer characteristics and low odour and toxicity. These properties enable Servospark oils to function as an insulator between tool and work-piece, a spark conductor, a coolant and a flushing medium for chip removal. |
| Servospark 3 | |
| Strip Grinding Oil (Neat) | |
| Servogrind 12 | Servogrind 12 is a premium stainless steel grip grinding oil with special additives. The additives incoporated are active during the strip grinding operation but do not cause any corrosion or stains. |
| Forming Oils | |
| Servoform 100 | Servoform oils are drawing and forming lubricants used for processes of varying severity for ferrous and non-ferrous metals. These oils have excellent lubricating, anti-wear and extreme pressure properties for taking care of severe stresses generated during forming and drawing application. The tailor made additive system also provides excellent oxidation stability and cleaning abilities for smooth surface finish to the final components. These oils also possess excellent de-greasability characteristics. |
| Servoform 220 | |
| Wire Drawing Lubricants (Neat) | |
| Servowiredraw | Servo Wiredraw is a heavy duty, high performance oil for drawing of stainless steel wires. This oil has excellent flushing property for keeping dies clean by taking away the generated iron fines quickly to the oil sump. Servo Wiredraw is recommended for wet drawing of stainless steel wires to produce products of very fine gauges. Specially added lubricity additives in the oil helps in reducing drawing forces at the die-wire interface by lowering coefficient of friction drastically. Servowiredraw AL has been developed for drawing of Aluminium wires. |
| Servowiredraw AL | |
| Wire Drawing Lubricants (Soluble) | |
| Servowiredraw CF 50 | Servowiredraw C oils are water miscible semi synthetic drawing lubricants for drawing of copper wires. These oils are used for drawing of bare, tinned, nickel- and silver plated copper wire in single and multiwire systems down to various diameters depending upon rod, medium or fine drawing. The emulsion has excellent cleaning power and has long sump life. Servowiredraw CA 100 is recommended for superfine drawing and continuous annealing. |
| Servowiredraw CM 150 | |
| Servowiredraw CA 100 | |
| Aluminium Hot Rolling Oil (Soluble) | |
| Servoarol 76 | Servoarol grades are water soluble oils for use in hot rolling of aluminium. Its primary use is with high speed continuous casting units such as Wire Rod Mill. They provide high reduction per pass at maximum rolling speed and stain free bright surface. The oil gives long emulsion life. |
| Servoarol 126 | |
| Aluminium Cold Rolling Oil (Neat) | |
| Servoarol Light | Servoarol Light is a premium quality oil for cold rolling of Aluminium sheets and foils. Its narrow boiling range and high IBP reduces the evaporation rate thereby bringing down the roll coolant consumption. Servoarol Light has inherent oiliness property to reduce friction, help metal reduction without permitting slippages. It is non-staining and non-corrosive in nature and has good additive solubility for fats or alcohols which are added by the aluminium manufacturers for production advantages. Servoarol Light meets Grade I of IS:14385-1996 requirements. |
| Copper Cold Rolling Oil (Neat) | |
| Servocubrol 10 | Recommended for rolling of Copper and Brass products. Made with high quality Group II base stock this very low SAP product is a neat cold rolling oil. Initially developed for use in Ordinance Factory, Ambarnath (Mumbai) for use in finishing stand of the 4 Hi Cold Rolling Mill — for rolling of the Brass (Cu alloy) plate used as a component in the Bofor's gun. |
| Steel Cold Rolling Oil (Soluble) | |
| Servosteerol C 29 | Servosteerol C 29 is a general purpose cost effective rolling oil. It is recommended for uses in all type of mills , particularly where rolling is not followed by annealing. |
| Servosteerol C 30 | Servosteerol C 30 is a cold rolling oil which also contains synthetic oil which gives the grade improved sheet cleanliness property. Due to its proper composition with natural fats,emuIsion shows excellent "Plate out" characteristic to ensure roll and strip cooling. Its frictional properties give correct roll bite, less strip breakage and longer roll life. Recommended for cold rolling of mild steels and medium carbon steels. |
| |ServosteeroI C5 | These are premium type high performance semi-synthetic cold rolling oils. Recommended for all major cold rolling mills of steel plant (reversible and tandem). They form a stable and long lasting emulsion with water and has excellent cooling and friction reducing properties which results in increased roll life, reduced power consumption, increased production and stain free surface finish. Servosteerol C5 is a high quality oil in water type emulsifying oil specially recommended for cold rolling of Silicon Steels. |
| |ServosteeroI SS C6 | |
| |ServosteeroI SS C28 | |
| |ServosteeroI SS C20S | |
| |ServosteeroI SS C215 | |
| )ServosteeroI SS C25 | |
| Steel Hot Rolling Oil | |
| Servosteerol H2 | Hot rolling oils are normally used in association with water since hot rolling requires lot of water for cooling of rolls etc. Oil brings in the lubricity which helps reduce load on mills, reduce power / energy consumption, help increase roll life in view of reduced wear of rolls. Steerol H2 is being successfully used in flat & long rolling mills in steel plants.SteeroI H3 Is being successfully used in flat rolling mills in stainless steel plants. Steerol H4 is suitable as rolling oil for rail mill applications. |
| Servosteerol H3 | |
| Servosteerol H4 | |
| Steel Cold Rolling Oil (Neat) | |
| Servosteerol 15 | Servosteerol 15 is rolling oil recommended for cold rolling of carbon steels particularly in 20 high rolling mills where a common oil is required for roll bearings and rolling lubrication. It provides excellent lubrication and anti-corrosive properties. Servosteerol 22 is especially developed for the cold rolling of alloy steels, nickel and chromium steels and stainless steels. It has excellent cooling ability and friction reducing characteristics and thus prolong the roll life, achieve better surface finish of steel sheets and reduce power consumption with increased production. For improved surface reflectance and sheet cleanliness, low viscosity product Servosteerol 22 J (L) is recommended in stainless steel rolling. |
| Servosteerol 22 | |
| Servosteerol 22 J (L) | |
| Cold Quenching Oil (bulk oil temp < 80 deg C) | |
| Servoquench 107 | Servoquench 107 is a medium viscosity normal speed quenching oil with good quality base oil. Servoquench 1 is a high viscosity normal speed quenching oil with good quality base oil. Such oils are used for increasing hardness of jobs (alloy steel) for general applications - normally semi finished products and forged pieces |
| Servoquench 11 | |
| Servoquench 707 | Servoquench 707 is a medium viscosity medium speed quenching oil with performance additives.ServoquenchC 11 is a high viscosity medium speed quenching oil with performance additives. It has improved thermo-oxidative stability, thus giving longer life. Servoquench 507 is a high viscosity medium speed quenching oil with performance additives. These are the most common type of quenching oils in use and well suited for applications of low / high alloy steel grades. |
| Servoquench C 11 | |
| Servoquench 507 | |
| Servoquench HS | Servoquench HS is a low viscosity medium fast speed quenching oil with performance additives. |
| Servoquench Super HS | Servoquench Super HS is a low viscosity fast speed quenching oil with performance additives. It has better thermo-oxidative stability than Servoquench HS and thus give longer life. Servoquench 207 and Servoquench 807 are medium viscosity fast speed quenching oil with performance additives having low volatility. |
| Servoquench 207 | |
| Servoquench 807 | |
| Servoquench F1 | Servoquench F1 is a high viscosity ultra fast speed quenching oil with performance additives used for special steel grades and end use applications. |
| Hot Quenching Oil (bulh oil temp < 200 deg C) | |
| Servomartemp | Servomartemp oils are specially developed marquenching oil having exceptional oxidation and thermal stability to ensure consistent quenching characteristics and long oil life. The oils are highly suitable for quenching finished components at a elevated oil bath temperature.Lower the viscosity of the oil, faster the quenching speed. This type of quenching provides structural hardness specially required for manufacturing items like gears, tools, dies and bearings. |
| Servomartemp 170 | |
| Servomartemp 65 | |
| Heat Transfer Fluids | |
| Servotherm Light | Servotherm oils are specially developed mineral oils for use in heat transfer industrial application. These oils possess excellent thermal and oxidation stability, low volatility and low vapour pressure to give long and trouble free service life in heat transfer systems. Servotherm Light and Medium are recommended for well designed heat transfer systems up to 260 degC and 300 deg C respectively. |
| Servotherm Medium | |
| Servotherm Special | Servotherm Special is a premium heat transfer fluid manufactured from carefully selected base stocks and contain selected anti-oxidants.This oil with its low sulphur content and low CCR value provides superior performance.Servotherm Special is recommended for well designed heat transfer system operating up to 315°C. |
| Servotherm Super | Servotherm Super is a superior additive treated heat transfer fluid containing selected anti-oxidants. This oil possesses improved thermal and oxidation stability, low volatility and low vapour pressure to give long and trouble free service life in well designed heat transfer systems. Servotherm Super is recommended for bulk oil temperatures up to 315 deg C. |
| Servotherm Medium Plus | Servotherm oils are specially developed mineral oils for use in heat transfer industrial application. These oils possess excellent thermal and oxidation stability, low volatility and low vapour pressure to give long and trouble free service life in heat transfer systems. This oil is suitable for use in both closed as well as open type heat transfer systems. This oil has a high resistance to thermal cracking and hence maintain its heat transfer efficiency even when subjected to repeated high and low temperature cycles. |
| Synthetic Heat Transfer Fluids | |
| Servotherm S Light | Servotherm S Light is a low viscosity grade synthetic heat transfer fluid specially designed for process applications where both heating and cooling are required. II is approved by M/s.Lurgi Germany for use in Phthalic anhydride plant. |
| Servotherm S Medium | Servotherm S Medium is a moderate viscosity grade synthetic heat transfer fluid caable of providing bulk oil temperature of 320°C and ideally suitable for liquid phase operations. This oil has excellent thermal & oxidation stability, low volatility and good heat transfer properties. |
| Servotherm SHT 32 | Servotherm SHT 32 is a moderate viscosity fully synthetic heta transfer fluid designed for use in non pressurized/ low pressure indirect heating systems for bulk temperatures up to 345 deg C.The high boiling point of Servotherm SHT 32 reduces volatility. The oil is 100% non toxic and biodegradable. It is non-corrosive to metals commonly used in Heat transfer systems. |
| Servoduotherm S | Servoduotherm S is a fully syntghetic heat transfer fluid for use in industries requiring liquid/vapour phase heat transfer up to 400 deg C. The product is suitable for use in Solar power plants using CSP technology |
| Coating Oil - Short term rust preventives | |
| Servosteerol CP 14 | Servosteerol CP 14 / CP 20 / CP 50 are oil recommended for use after pickling application. They are required in plants where there is a waiting period between pickling operation and rolling operations. They possess good lubricity apart from having good anti-rust characteristics and are thus used on sheets prior to cold rolling. It has good compatibility with rolling lubricants. They have found use in SAIL plants of Bokaro and Rourkela |
| Servosteerol CP 28 | |
| Servosteerol CP 50 | |
| Rust Preventives (Oil Based) | |
| Servo RP B | Servo RP B was originally designed as rust preventive oil for bearing industry. This oil is a barium-free, thixotropic corrosion protection concentrate. It is a high viscosity, high film thickness RP oil. The oil fulfils the specific corrosion protection requirements of the roller bearing industry. Can be applied by spraying, dipping or flooding when diluted with solvents. |
| Servo RP 125 | Servo RP 125 is a general purpose RP oil. The oil forms an oily film over work-piece when applied by dipping/ spraying.The oil film can be removed easily with petroleum solvent, by alkaline cleaning or by vapour degreasing agent. It is used for indoor rust protection during in-between operations, and short-term storage before wrapping. The oil can also be used for short-term outdoor storage. It is also recommended for Internal protection of engines and machinery where removal of oil film is difficult. The oil film formed is compatible with general lubricating oils. |
| Servo RP 130 | These are oil based rust preventives developed for cold rolled sheet application with varying protection requirement. The oil can be applied at room temperature by spraying through nozzles, by drip, by roller and by brush. It provides thinner oily film but ensures excellent protection during indoor and outdoor storage as well as during material transportations. They may be used as flushing oil also. Servo RP 130 B Super was initially developed for use by Bokaro Steel |
| Servo RP 130 B Super | |
| Servo RP 130 Super | |
| Servo RP 130 Plus | |
| Servo RP 130 RS | This oil has also been developed for application on cold rolled sheets for Rourkela Steel plant. |
| Servo RP 130 Super (T) | This oil has also been developed for application on cold rolled sheets. Application is by spray. It is a premium product as it has additionally very good resistance against acid atmosphere. Was initially developed as an alternative to requirement at Tata Steel. |
| Servo RP 150 | Servo RP 150 is a superior light bodied rust preventive formulated with special additives. The oil forms a soft oily film over the metal surface when applied by spraying /brushing/ dipping and is recommended for protection of work-piece against rusting during in-between operations and short-term indoor and outdoor storage. This is a high film thickness rust preventive oil used for protection of engineering components. The oil film can be removed easily by wiping or with the help of a petroleum solvent. |
| Servo RP 150 Plus | Servo RP 150 Plus is an oil based rust preventive oil having load bearing properties. It is a rust preventive oil cum running in lubricant for gear box application and thus compatible with industrial gear oils. The oil can be used as rust preventive oil for coating heavy duty gearboxes or other similar machinery where RP oil cannot be applied by spray / brush. This oil leaves a thick oil film on the internal parts of the machinery and ensures long term protection of the costly components in humid atmosphere. The oil can be poured in or the equipment may be dipped in the oil at room temperature. After drainage a protective anti-corrosive coating is formed on the internal surfaces of the equipment which will protect the surface for about 6 months to one year based on the effectiveness of the other protection (like place of storage, use of VCI paper etc.). Ideally suited for interim and transit protections of steel components especially heavy equipments. |
| Servo RP 180 ES | These are premium oil based rust preventive oil specially for cold rolled sheet applications by electrostatic spray systems at 40-50 deg C. Here we have high viscosity Servo RP 180 ES which is approved by Mls Peabody USA & Mls Ravarini Castoldi Italy. We also have a low viscosity Servo RP 190 ES for application on cold rolled sheet by electro static spray systems. It protects the shine and aesthetic look of the sheet after the coating. This oils forms an uniform homogenous, tacky oily film on the steel sheet. They have excellent compatibility with metals and leaves no stain on the steel components after its application. Thixotropic characteristic of the oil ensures non-dripping after application through electrostatic spray system. |
| Servo RP 190 ES | |
| Servo RP 200 | This is a high viscosity, high film thickness rust preventive oil for application on cold rolled sheets, cycle rims / frames, handle bars etc. Initially developed for Avery Cycles, Ludhiana. |
| Rust Preventives (Solvent Based - Non Bituminous) | |
| Servo RP 102 WD | These are solvent deposited, water displacing type rust preventive oils. They contain oil soluble surface-active agents, dissolved in solvent with a suitable corrosion preventive and film forming components. They contain selected additives, which impart excellent ability to replace water from wet metal surfaces and form a uniform continuous oily film. They can be applied at room temperature by dipping or spray method. When the metallic component is dipped in such oils, the water adhering to the metal surface gets dislodged by a extremely thin film of the product. Usual precautions with a solvent-based product should be taken in view of its low flash point. The film formed over metal surface can be easily removed by dipping or wiping with a suitable solvent or mild alkaline cleaners. Recommended against the following rust preventive oil standard: BS7541-1992 Type TP (2B) rust preventive & - IS-1154-2000 — Temporary corrosion preventive fluid soft film, solvent deposited, water displacing type. Servo RP 104 WD contains special additive system for impaling thixotropic property, responsible for lower drainage after application of rust preventive oil |
| Servo RP 103 WD | |
| Servo RP 104 WD | |
| Servo RP 105 WD | |
| Servo RP 106 WD | |
| Rust Preventives (Solvent Based - Bituminous) | |
| RP 116 B | This is a bitumen based rust preventive oil diluted with solvents to facilitate application. It forms a , firm, hard , thick film that sticks firmly on the surface. It is recommended for long term indoor / outdoor protection of metallic components. It can be applied by dipping the metallic component into cold bath of rust preventive. It provides uniform coating to metallic surfaces after drying for at least for 2 hours undisturbed for evaporation of solvent. Applications include the protection of steel rods, tubes, wires, assemblies, castings, industrial plant structure, water tanks etc. Servo RP 116 B meets IS-1153-2000 specification of solvent based corrosion preventives, which forms a hard film. Similarly Servo RP 16 BX meets specifications of solvent based corrosion preventives, which forms a semi-hard film. |
| RP 116 BX | |
We provide not just top lubricants, but complete solutions to help businesses run with a high degree of efficiency, reliability and high-quality.